JessEm Mast-R-Slide™ 7500
Precision Sliding Cross-Cut Table
The Ultimate Cross Cutting Accessory For Your Table Saw!

Take your table saw to a higher level of precision and performance with the New Mast-R-Slide™ Sliding Cross-Cut Table from JessEm Tool Company. This fine quality table saw system features a network of beautifully engineered aluminum extrusions, steel guide rails and precision bearings designed to create the ultimate cross-cutting solution. Designed to replace the left extension wing on most American style cabinet saws and contractor saws with cast iron table tops.

The Mast-R-Slide™ system features JessEm’s innovative Posi-Trak™ bearing guided multi-rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other. The guide mechanism is comprised of 30 double-sealed precision bearings positioned in a staggered design to provide constant contact to the guide rails throughout its travel. The sliding table is easily adjustable to level with the saw’s tabletop and to align it parallel to the cutting blade. Also included is an extension wing support table that is fully adjustable for positioning in a fixed location anywhere along the length of the sliding table as determined by the cutting operation being performed.
The extruded aluminum fence length is 28 inches closed and extends outward for a maximum measured cut length of 48 inches with the flip-stop. The fence offers mitered cross-cuts up to 45 degrees in both directions. The Mast-R-Slide™ sliding table offers three positions for the fence, two front end positions (one optimal location for mitered crosscuts and another allowing for an increased cutting width at 90 degrees) and a rear end position for a maximum cross-cut capacity of 36 inches. The fence is easily moved from one position to the other and quickly detaches from the sliding table for unobstructed use of the table saw while utilizing the rip fence.

The Mast-R-Slide™ 7500 was designed so that no support legs are required, offering a smaller footprint and allowing the optional use of a mobile base on the saw. The Mast-R-Slide™ 7500 will fit right or left-tilt table saws and is designed to be used on the left side of the saw. The table saw must have a solid cast iron top and the front and rear fence rails will require modification.

FEATURING. . .

  • Featuring JessEm's innovative Posi-Trak™ bearing guided multi-rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other. 
  • Exclusive linear guide mechanism comprised of 30 double-sealed precision bearings and steel tracks contained in heavy gauge aluminum extrusions for rock solid precision through the cut. 
  • Fence length is 30 inches closed and extends outward for a maximum measured cut length of 48 inches with adjustable flip-stop. 
  • Fits left and right tilt saws and offers a 36 inch maximum cross cut. 
  • Designed for table saws with cast iron table tops with a front to rear depth of 27” to 28”. 
  • Not designed for bench top or portable contractor saws. 
  • Replaces the left “cast-iron” wing on table saws with a three or four bolt mounting pattern. 
  • Front and rear fence rails will require modification. 
  • Instructions included.

Product Specifications - 

  • Maximum stroke: 37"
  • Length of cut off fence: 28” extends to 48”
  • Length of rail system: 27”
  • Sliding Table Dimensions: 7-7/8” x 40”
  • Outrigger Table Dimensions: 8-1/2” x 8-1/2”
  • Sliding Table Width including Outrigger: 16-3/8”
  • Maximum Cross Cut (w/fence in front position): 34”
  • Maximum Cross Cut (w/fence in middle position): 25”
  • Maximum Cross Cut (w/fence in rear position): 36”
  • Unit Weight: 48 lbs

* Actual cross cut capacities may vary as the position of the saw blade varies from saw to saw.
MODEL# DESCRIPTION
07500
Mast-R-Slide™ 7500
Precision Sliding Cross-Cut Table