|
|
|
|
| Our
lastest lift solution for the router table is the new MAST-R-LIFT
EXCEL™.
This product combines our solid phenolic MAST-R-TOP™
in black, with all the features of our MAST-R-LIFT™
and more. This combination was designed to allow the addition of two
great new features, a micro adjust dial which protrudes slightly beyond
the edge of the tabletop and rotates independently of the lift mechanism.
This feature allows you to "zero-out" the MICRODIAL™
and then accurately crank the router up at a ratio of 1/64 inch per
1/4 turn of the crank. The dial is scaled for micro adjustments as
intricate as .001". Extremely precise adjustments to the router
bit cutting height can now be performed faster and easier than ever
before. |
|
The
second feature to this new product is an integrated dust port
that is machined into the lift's housing underneath the table
top. This design virtually sucks up the chips just as they
are cut by the router bit. This design feature will literally
extend the working life of the router motor. When mounted
to the router table, the router motor is positioned upsid-
down leaving the internal motor vulnerable to an accumulation
of dust and pitch deposits. This causes the motor to heat
up over time and eventually fail. JessEm's new lift design
removes the chips before they can reach the router, ultimately
prolonging the life of the motor through more efficient chip
extraction.
|
|
|
|
|
The
black phenolic MAST-R-TOP™
includes our MAST-R-TRAC™
with a Miter Track in between two T-tracks. this heavy gauge
6061 aluminum extrusion is anodized in red and ready to attach
jigs, hold-downs or a miter gauge. The lift mechanism is raised
and lowered by an offset right-angle gearbox positioned in the
right front corner, under the table top. The gearbox features
a red anodized aluminum "balanced ball crank" handle
reminiscent of the classic milling machines used in metalworking.
The gearbox drives the lift mechanism via a precision timing
belt. The lift mechanism utilizes our patented adjustable tensioning
design for reliable operation with the utmost accuracy and no
backlash. |
| The
new MAST-R-LIFT EXCEL™
will accept the Porter Cable model 7518 out of the box, and
accepts additional routers with cylindrical motor housings with
the use of a reducer collar (sold separately). The centerhole
in the tabletop is machined with a 3-5/8" diameter TAB-LOC™
centerhole to accept up to a 3-1/2" diameter raised panel
bit. An insert ring with a 1-1/2" diameter centerhole for
most smaller bit diameters, an insert ring wrench, starting
pin and hex key wrench are also included. Additional insert
rings sets are available separately. (please see our accessories
page). |
 |
|
| MODEL# |
DESCRIPTION |
| 02201 |
MAST-R-LIFT
EXCEL COMBINATION MAST-R-TOP W / BUILT-IN MAST-R-LIFT
- SOLID PHENOLIC TABLETOP MEASURES 24" DEEP X 32"
WIDE. |
| 02111 |
REDUCER
COLLAR - 3-1/2" DIA. FOR PC 690, BOSCH 1617/1618
AND DEWALT 610. |
| 02113 |
REDUCER
COLLAR - 3-1/4" DIA. FOR MAKITA 1101 |
| 02115 |
REDUCER COLLAR – FOR HITACHI M12VC & KM12VC |
| 02116 |
REDUCER SHIM KIT – FOR MILWAUKEE SERIES 5625 |
| 02118 |
REDUCER COLLAR – FOR MILWAUKEE SERIES 5615, 5616 & 5619 |
ROUTER AND BITS NOT
INCLUDED. MAST-R-FENCE™
AND STAND SOLD SEPARATELY.
|
|
| |
| |
|
