Phenolic Router Insert Plate

Mast-R-Lift Excel II™

Mast-R-Lift II™

Mast-R-Lift II™

Home

Product Manuals

Products

Where To Buy

What's New

Contact

About Us

The best valued MDF router table top in the woodworking market. The Rout-R-Top™ is made from 1" thick high density fiber board with high pressure laminate on the top and bottom. The top is edge banded for long life.

The table comes standard with corner and side levelling pads. Each corner levelling pad is designed with tapped brass inserts which allow for (2) levelling set screws. The levelling set screws can be adjusted with a hex key from the bottom of the table. Each levelling set screw is provided with a jam nut to secure the set screw at the proper height. Each corner levelling pad is designed with a center hole for securing the insert plate securely in the table opening.

The Rout-R-Top ™ comes standard with an aluminum extruded miter gauge track which is great for mounting jigs, fixtures and feather boards.

The Rout-R-Top™ is available pre-machined to fit our Mast-R-Lift II™, Rout-R-Lift II™ and Rout-R-Plate™.

Rout

New extruded aluminum track with 1/4" t-slot for your accessories and standard 3/4" miter track.

Corner and side levelling pads ensure you can adjust your router insert perfectly flush to the top of the table.

New extruded aluminum track with 1/4" t-slot for your accessories and standard 3/4" miter track.

Adjusting the height of your router insert is simple from underneath. With corner and side levelling pads there are (12) points of contact for your router insert.