Phenolic Router Insert Plate

Mast-R-Lift Excel II™

Mast-R-Lift II™

Mast-R-Lift II™

Home

Product Manuals

Products

Where To Buy

What's New

Contact

About Us

Clearance and Factory Specials

The Pocket Zip Slot Mortise Mill is a scaled down version of the Zip Slot Mortise Mill and utilizes same type of bearing guided drill bushing mounted into a carriage assembly. The carriage slides back and forth on two shafts while guiding a hand drill equipped with a special mortising drill bit. The drill bit is inserted into the bushing and forms a rigid support that acts as a spindle assembly and allows you to easily mill clean, crisp slot mortises in hard and soft woods.

The jig effectively turns your hand drill into a milling machine for cutting slot mortises up to 1-1/4" long. The model # 8200 Pocket Zip Slot Mortise Mill comes with a 1/4" bearing mounted drill guide bushing and a 1/4" mortising drill bit.

The Pocket Zip Slot Mortise Mill is designed to be clamped to your workpiece either with a clamp or a bench vice and the top plate can also be removed and clamped directly to the workpiece. A reference slot of the base of the Pocket allows accurate positioning of the workpiece for milling repeatable slot mortises.

Mortise and Tenon joinery has long been considered the supreme form of joinery by makers of fine woodwork. When it comes to long lasting strength and quality of craftsmanship nothing else will do. Here is an innovative new system that makes mortise and tenon joinery faster, safer, easier and for less cost than most alternative M & T systems available.

POCKET

To see a video demonstration of the Pocket Zip Slot™ in action click here.

SHOP ONLINE NOW